Beko Freezer 7063 MB Manual

The Beko Freezer 7063 MB is a freestanding freezer with a total net capacity of 63 liters, featuring manual defrost, a 4-star freezing compartment, adjustable thermostat control, interior light, reversible door, and energy-efficient operation. Designed for household use, it offers reliable food preservation with easy-to-use controls. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Freezer cabinet, adjustable thermostat, interior light, door shelves, ice tray, reversible door hinges, manual defrost system.

Installation

Unpack and inspect contents. Position in suitable location.

1. Choose location: Place on level floor away from heat sources and direct sunlight.
2. Ventilation: Ensure at least 10cm clearance at back and sides for air circulation.
3. Leveling: Adjust feet to ensure freezer is level for proper door operation.
4. Electrical connection: Plug into grounded 220-240V AC outlet.
5. Door reversal: Follow instructions to change door opening direction if needed.

WARNING! Do not place near ovens or radiators. Ensure proper ventilation to prevent overheating.

First-Time Setup

Before first use, prepare the freezer properly.

1. Clean interior: Wipe inside with solution of bicarbonate of soda and water, then dry.
2. Position thermostat: Set to middle position (recommended setting 3-4).
3. Pre-cool: Allow freezer to run empty for 2-3 hours before adding food.
4. Load food: Place items evenly, leaving space for air circulation.
5. Check operation: Verify interior light turns on when door opens.

CAUTION! Do not use sharp objects to remove ice or clean surfaces.

Specifications

• Model: Beko 7063 MB
• Type: Freestanding Freezer
• Net Capacity: 63 liters
• Defrosting: Manual
• Freezing Capacity: 4-star compartment
• Energy Class: As per energy label
• Climate Class: N, ST, or T (check rating plate)
• Power Supply: 220-240V AC, 50Hz
• Dimensions (HxWxD): Approximately 85 x 55 x 60 cm
• Weight: Approximately 25 kg

Controls and Settings

Thermostat dial controls temperature. Located inside freezer compartment.

Thermostat Settings: 0 = Off, 1 = Warmest, 5 = Coldest. Recommended setting: 3-4 for normal operation.

Interior Light: Automatically turns on when door opens, off when closed.

Door Alarm: Some models feature audible alarm if door left open (optional).

Fast Freeze: If equipped, switch to maximum setting for rapid freezing of fresh food.

Loading and Organizing

Proper loading ensures efficient operation and food preservation.

1. Pre-freeze food: Cool hot food before placing in freezer.
2. Package properly: Use airtight containers or freezer bags to prevent freezer burn.
3. Label and date: Mark packages with contents and date.
4. Organize: Place frequently used items at front, raw meat at bottom.
5. Do not overload: Leave space between items for air circulation.
6. Maximum capacity: Do not exceed freezing capacity indicated in manual.

Tip: Keep inventory list to minimize door opening time.

Defrosting and Cleaning

Manual defrost required when ice buildup exceeds 5mm.

1. Prepare: Remove all food, place in cool box or another freezer.
2. Turn off: Set thermostat to 0 or unplug freezer.
3. Speed defrost: Place bowls of hot water inside to accelerate melting.
4. Collect water: Place towels or shallow pan to catch water.
5. Clean: Once defrosted, clean interior with mild detergent solution.
6. Dry: Wipe completely dry before restarting.
7. Restart: Plug in, set thermostat to normal setting, reload food after 2-3 hours.

WARNING! Never use sharp tools to remove ice. Never use electrical appliances to speed defrosting.

Energy Saving Tips

Reduce energy consumption with proper use.

• Position away from heat sources and direct sunlight.
• Ensure door seals are clean and tight.
• Defrost regularly to maintain efficiency.
• Allow hot food to cool before freezing.
• Open door as little as possible and close quickly.
• Check that door is fully closed after each use.
• Maintain adequate ventilation around appliance.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Exterior cleaning: Wipe with soft damp cloth and mild detergent.
2. Door seals: Clean with warm soapy water, check for damage.
3. Condenser: Keep rear grille dust-free (unplug before cleaning).
4. Interior: Clean every 2-3 months with bicarbonate solution.
5. Inspection: Regularly check for unusual noises or temperature changes.

CAUTION! Unplug before any maintenance. Do not use abrasive cleaners.

Regulatory Information

CE Marked: Complies with European safety standards. WEEE Directive: Contains materials that must be recycled separately. For disposal, contact local authorities. Energy Label: Complies with EU energy labeling requirements. Manufacturer: Beko PLC. For support, visit www.beko.com or contact local service center.

Troubleshooting

Reset: Turn thermostat to 0, wait 5 minutes, then reset to normal position.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.