Beko Freezer BU1103N Manual

The Beko BU1103N is a 99-liter upright freezer featuring a 4-star freezing capacity, manual defrost system, adjustable thermostat, reversible door, interior light, and removable wire shelves. Designed for household use with energy efficiency in mind. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Positioning 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Food Storage Guidelines 7. Defrosting & Cleaning 8. Energy Saving Tips 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright freezer cabinet, adjustable thermostat control, reversible door, interior light, removable wire shelves, and manual defrost system.

FeatureDescription
Freezing Capacity4-star rating (suitable for freezing fresh food)
Net Capacity99 liters
Defrost SystemManual defrost
ThermostatAdjustable dial control (1-5)
DoorReversible (can be hung left or right)
Interior LightYes, for illumination
ShelvesRemovable wire shelves for flexible storage
Energy ClassDesigned for energy efficiency
Climate ClassSN (Extended temperate: 10°C to 32°C)
Power Supply220-240V, 50Hz

Installation & Positioning

Unpack and inspect contents. Remove all packaging materials and protective film.

  1. Positioning: Place on a flat, stable, and dry surface away from heat sources and direct sunlight.
  2. Clearance: Ensure at least 5 cm clearance at the back and sides for proper ventilation.
  3. Leveling: Adjust the front feet to ensure the appliance is level for proper door closure.
  4. Power Connection: Plug into a grounded 220-240V, 50Hz outlet. Do not use extension cords.
  5. Door Reversal: If needed, follow instructions in the manual to reverse the door hinge.

WARNING! Do not place heavy items on top. Ensure the appliance is not tilted more than 45° during movement.

First-Time Setup

Before first use, clean the interior with a solution of warm water and baking soda. Rinse and dry thoroughly.

  1. Initial Cooling: Turn the thermostat dial to the middle setting (e.g., 3). Allow the freezer to run empty for at least 2-3 hours to reach the correct temperature.
  2. Temperature Setting: For normal operation, set the thermostat between 3 and 4. Adjust based on ambient temperature and load.
  3. Loading Food: Do not overload. Allow space between items for air circulation.
  4. Door Alignment: Check that the door seals properly and closes easily.

CAUTION! Do not place hot food inside. Allow food to cool to room temperature first.

Specifications

Controls and Operation

The main control is the thermostat dial located inside the freezer compartment.

Thermostat Dial (1-5):
1 = Warmest setting (higher temperature)
2-3 = Recommended for normal use
4-5 = Coldest setting (use in hot environments or for maximum freezing)
0 = Off position

Interior Light: Turns on automatically when the door is opened.

Door Alarm (if applicable): A sound may alert you if the door is left open for an extended period.

Operation Tips: Avoid frequent door openings. Let the freezer stabilize after adjusting the thermostat.

Food Storage Guidelines

Proper storage ensures food quality and energy efficiency.

  1. Pre-cool hot food to room temperature before freezing.
  2. Use airtight containers or freezer bags to prevent freezer burn and odor transfer.
  3. Label and date all packages.
  4. Do not overload shelves; allow air to circulate around packages.
  5. Store similar items together for easy access.
  6. Recommended freezer temperature: -18°C or lower.

Tip: The fast freeze function (if available by turning to max setting) should be used several hours before adding fresh food for freezing.

Defrosting & Cleaning

This model requires manual defrosting when the ice buildup is about 5 mm thick.

  1. Turn the thermostat dial to "0" (Off) and unplug the appliance.
  2. Remove all food, wrap it in newspapers or blankets to keep it cold.
  3. Place towels and a shallow container inside to collect water.
  4. Leave the door open to allow ice to melt naturally. Do not use sharp objects or heaters to speed up defrosting.
  5. Once defrosted, clean the interior with a solution of warm water and mild detergent. Rinse and dry thoroughly.
  6. Plug in, set the thermostat, and allow to cool before reloading food.

WARNING! Never use sharp tools to remove ice. Never use chemical cleaners or abrasives.

Energy Saving Tips

Care & Maintenance

Unplug before any maintenance. Clean exterior with a soft, damp cloth and mild detergent.

Door Seals: Check regularly for cracks or dirt. Clean with water and dry thoroughly to ensure a tight seal.

Condenser Coils (rear): Dust off periodically with a soft brush or vacuum cleaner to maintain efficiency.

Interior: Clean spills immediately. Regular cleaning prevents odors.

CAUTION! Do not use abrasive cleaners, solvents, or sharp objects. Do not pour water over the appliance.

Regulatory Information

This appliance complies with relevant EU Directives and standards. The symbol on the product or its packaging indicates that this product must not be disposed of with other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your local authority or your household waste disposal service. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Freezer not coolingPower supply / Thermostat settingCheck if plugged in and power is on. Ensure thermostat is not set to "0".
Excessive frost buildupFrequent door openings / Poor sealDefrost the freezer. Check door seal and clean it. Avoid leaving door open.
Unusual noiseAppliance not level / Items touching rear wallLevel the appliance by adjusting feet. Ensure nothing is touching the interior rear wall.
Door does not close properlyAppliance not level / Overloaded shelves / Dirty sealLevel the appliance. Rearrange load. Clean the door gasket.
Interior light not workingBulb failureReplace the bulb with a suitable appliance bulb (unplug first).
High energy consumptionPoor ventilation / Frequent defrost needed / High ambient temperatureEnsure clearance around appliance. Defrost regularly. Position in a cooler location.

Reset: Turn thermostat to "0", wait 5 minutes, then turn back to desired setting.

Service: For persistent issues, contact authorized Beko service. Do not attempt to repair yourself.

Beko Freezer BU1103N Manual © - All Rights Reserved 2025