Beko Freezer FN 126420 Manual

The Beko Freezer FN 126420 is a freestanding freezer with a 126-liter capacity, featuring a 4-star freezing capability, manual defrost system, adjustable thermostat, interior light, reversible door, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using the Freezer 7. Defrosting & Cleaning 8. Energy Saving Tips 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Freezing compartment, adjustable thermostat, interior light, reversible door, manual defrost system, adjustable feet.

Feature	Description
Capacity	126 liters (4.45 cu. ft.)
Freezing Capability	4-star rating (suitable for freezing fresh food)
Defrost System	Manual defrost
Thermostat	Adjustable temperature control
Interior Light	Illuminates interior when door is opened
Door	Reversible door (can be hung left or right)
Adjustable Feet	Leveling feet for stability
Energy Class	Energy efficient design
Shelves/Baskets	Adjustable wire shelves and baskets
Fast Freeze	Switch for rapid freezing of fresh food

Installation

Unpack and inspect contents. Place on stable, level surface.

Positioning: Allow at least 10cm clearance at back and sides for ventilation.
Leveling: Adjust feet using a wrench to ensure freezer is level.
Door reversal (if needed): Follow instructions in manual to change door hinge side.
Electrical connection: Plug into grounded 220-240V AC, 50Hz outlet.
Initial wait: Let freezer stand upright for 4 hours before first use.

WARNING! Do not place near heat sources. Ensure proper ventilation. Use two people for handling.

First-Time Setup

After installation, prepare freezer for first use.

Cleaning: Wipe interior with solution of bicarbonate of soda and water, then dry.
Power on: Plug in and turn thermostat to medium setting.
Initial cooling: Let freezer run empty for 2-3 hours to reach operating temperature.
Loading: Gradually add food items, avoiding overfilling.
Fast freeze: Use Fast Freeze switch when adding large quantities of fresh food.

CAUTION! Do not use sharp objects to remove ice. Keep door closed as much as possible.

Specifications

Model: FN 126420
Capacity: 126 liters (Gross)
Energy Class: A+ (or as per model)
Annual Energy Consumption: Approximately 180 kWh
Climate Class: SN, N, ST, T (suitable for various ambient temperatures)
Refrigerant: R600a
Noise Level: 40 dB(A)
Dimensions (HxWxD): 85 x 55 x 60 cm (approx.)
Weight: 30 kg (approx.)
Power Supply: 220-240V AC, 50Hz

Controls and Settings

Thermostat control dial located inside freezer compartment.

Thermostat Settings: 1 (warmest) to 5 (coldest). Recommended setting: 3 or 4 for normal operation.

Fast Freeze Switch: When activated, compressor runs continuously for rapid freezing. Turn off after 24 hours or when food is frozen.

Temperature Indicator: Normal operating temperature should be -18°C or lower.

Door Alarm: Audible alarm sounds if door remains open for several minutes.

Using the Freezer

Proper use ensures optimal performance and food preservation.

Pre-freezing preparation: Package food in airtight containers or freezer bags.
Loading: Distribute items evenly, leaving space for air circulation.
Organization: Use baskets for smaller items, shelves for larger packages.
Fast Freeze: Activate when adding unfrozen food (max 10% of capacity).
Door opening: Minimize frequency and duration to maintain temperature.
Storage times: Follow recommended storage times for different food types.

Tip: Label packages with date and contents. Use older items first (FIFO).

Defrosting & Cleaning

Manual defrost required when ice buildup exceeds 5mm.

Preparation: Remove all food, place in cool box with ice packs.
Turn off: Set thermostat to 0 or unplug freezer.
Defrosting: Leave door open, place towels to catch water.
Speed up: Place bowls of warm water inside (not boiling).
Cleaning: Wash interior with solution of bicarbonate of soda and water.
Restart: Dry thoroughly, plug in, set to normal, wait 2 hours before reloading.

WARNING! Never use sharp objects to remove ice. Never use chemical cleaners.

Energy Saving Tips

Maximize efficiency and reduce energy consumption.

Position away from heat sources (ovens, radiators, direct sunlight).
Ensure door seals are clean and tight.
Defrost regularly when ice exceeds 5mm thickness.
Allow hot food to cool before freezing.
Keep freezer well-organized to minimize door opening time.
Set thermostat to recommended setting (3 or 4).
Ensure adequate ventilation around appliance.

Regulatory Information

CE marked. Complies with EU directives for electrical equipment. Contains flammable refrigerant (R600a) and insulating foam. For disposal, contact authorized service center. Manufacturer: Beko PLC. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Freezer not cooling	Power supply/thermostat	Check plug connection; ensure thermostat not set to 0; wait 24 hours after first start.
Excessive frost/ice	Door seal/frequent opening	Check door seal; defrost if ice >5mm; reduce door opening frequency.
Unusual noise	Leveling/items touching	Ensure freezer is level; check nothing is touching back panel.
Door difficult to close	Overloading/gasket	Rearrange contents; clean door gasket; check alignment.
Light not working	Bulb/door switch	Replace bulb; check door switch mechanism.
Compressor runs continuously	Fast freeze on/hot room	Turn off Fast Freeze; ensure room temperature not too high.

Service: For technical assistance, contact authorized Beko service center. Do not attempt repairs yourself.