Beko Freezer FN 131920 Manual

The Beko Freezer FN 131920 is a freestanding upright freezer with a total net capacity of 131 liters, featuring 4 adjustable door shelves, 4 adjustable interior shelves, a fast freeze function, an interior light, an audible door open alarm, and an energy efficiency class of A++ or higher. It operates on a standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Temperature Management 7. Storage Organization 8. Energy Saving Tips 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright cabinet with adjustable shelves, electronic control panel, door bins, fast freeze compartment, interior light, and door alarm.

Feature	Description
Total Net Capacity	131 liters
Adjustable Shelves	4 interior shelves, adjustable in height
Door Shelves	4 adjustable door bins for small items
Fast Freeze Function	Rapidly lowers temperature for new food
Interior Light	LED light for interior illumination
Door Open Alarm	Audible alarm if door is left open
Electronic Controls	Digital temperature display and settings
Energy Class	A++ or higher for energy efficiency
Reversible Door	Door can be hinged on left or right side
Power Indicator	LED shows when unit is powered on

Installation

Unpack and remove all packaging materials. Place on a level, stable floor.

Positioning: Allow at least 5 cm clearance at back and sides for ventilation.
Leveling: Adjust the front feet to ensure the freezer is level.
Door Reversal (if needed): Follow instructions in manual to change hinge side.
Power Connection: Plug into a grounded 220-240V, 50Hz outlet.
Initial Standby: Let the freezer stand upright for 4 hours before first use.

WARNING! Do not place near heat sources. Ensure the power cord is not pinched.

First-Time Setup

After installation, prepare the freezer for first use.

Initial Cleaning: Wipe interior with a solution of warm water and baking soda.
Power On: Plug in the unit. The power indicator LED will illuminate.
Set Temperature: Use the control panel to set the desired temperature (recommended -18°C).
Activate Fast Freeze: Press the FAST FREEZE button for 24 hours before loading food.
Load Food: Place food items evenly, allowing space for air circulation.

CAUTION! Do not overload the freezer. Allow cold air to circulate freely.

Specifications

Model: FN 131920
Type: Upright Freezer
Net Capacity: 131 liters
Energy Class: A++ or higher
Annual Energy Consumption: Approximately 180 kWh
Climate Class: SN, N, ST, T (10°C to 43°C)
Noise Level: ≤ 40 dB(A)
Refrigerant: R600a
Power Supply: 220-240V, 50Hz
Dimensions (HxWxD): Approx. 85 x 55 x 62 cm

Controls and Settings

The electronic control panel is located on the front exterior.

Control Panel: POWER button, Temperature Adjustment buttons (+/-), FAST FREEZE button, Alarm Reset button.

Temperature Setting: Range from -24°C to -16°C. Recommended setting is -18°C. Fast Freeze: Activates maximum cooling for 24 hours or until manually turned off. Alarm: Sounds if temperature rises significantly or door is left open. Reset with button. Power Saving Mode: Can be activated via button combination (see manual).

Temperature Management

Maintaining correct temperature is crucial for food safety and efficiency.

Monitor: Check digital display regularly.
Adjust: Use +/- buttons to fine-tune. Allow 24 hours for stabilization after change.
Fast Freeze: Use when adding large amount of unfrozen food. Turns off automatically after 24 hours.
Door Seal: Ensure door gasket is clean and sealing properly to maintain temperature.

Tip: A full freezer is more efficient than an empty one. Use bottles of water to fill empty space.

Storage Organization

Organize food for optimal freezing and easy access.

Shelves: Adjust height to accommodate different sized items.
Door Bins: Store frequently used items or smaller packages.
Labeling: Label and date all packages.
Packaging: Use airtight, freezer-safe containers or bags.
Air Circulation: Do not block air vents inside the freezer.
Raw vs. Cooked: Store raw meat on lower shelves to prevent drips.

WARNING! Do not store flammable, volatile, or explosive substances. Do not store carbonated drinks in glass bottles.

Energy Saving Tips

Keep door closed as much as possible. Ensure good ventilation around the unit. Defrost regularly if frost exceeds 5 mm. Check door seal integrity. Set temperature to -18°C, not colder. Position away from heat sources like ovens.

Care & Cleaning

Unplug the freezer before cleaning. Remove all food and store in a cool place.

Interior: Clean with a solution of warm water and baking soda. Rinse and dry.
Exterior: Use a soft cloth dampened with mild detergent. Do not use abrasive cleaners.
Door Gasket: Wipe with clean water and dry thoroughly.
Condenser Coils (rear): Vacuum dust annually to maintain efficiency.
Defrosting: This is an auto-defrost model. Manual defrosting is not required under normal use.

CAUTION! Never use sharp objects to remove frost. Never use steam cleaners.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2017/1369/EU (Energy Labelling). The symbol on the product indicates that it should not be disposed of with other household waste. For proper recycling, contact your local waste disposal authority or the retailer where the product was purchased. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Freezer not cooling	Power issue, door ajar	Check if plugged in and power is on. Ensure door is fully closed.
Loud/unusual noise	Not level, items touching fan	Level the appliance. Rearrange items away from rear wall.
Excessive frost build-up	Door seal damaged, frequent opening	Check and clean door gasket. Minimize door openings.
Alarm sounds	Door open, power failure, high temp	Close door. Check if power was interrupted. Allow time to cool down.
Interior light not working	Bulb failure, door switch issue	Replace LED bulb (see manual). Check door switch mechanism.
Water pooling inside/under	Drain hole blocked (if applicable)	Locate and clear drain hole with warm water.

Reset: Unplug for 5 minutes, then plug back in to reset electronic controls.

Service: Consult your local Beko service center. Do not attempt repairs yourself.