Beko freezer FNE1073N Manual

The Beko freezer FNE1073N is a 7.1 cubic foot upright freezer with manual defrost, adjustable thermostat control, interior light, adjustable feet, reversible door, and energy-efficient operation. Designed for household use, it features multiple storage compartments, door baskets, and a fast freeze function. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using the Freezer 8. Defrosting Instructions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright freezer cabinet, adjustable thermostat, interior light, adjustable feet, reversible door, door baskets, and fast freeze function.

FeatureDescription
Capacity7.1 cubic feet (approx. 200 liters)
DefrostingManual defrost system
ThermostatAdjustable temperature control dial
Interior LightIlluminates interior when door is opened
DoorReversible door (left/right opening)
Adjustable FeetLeveling feet for stability
Fast FreezeRapid freezing function for new items
StorageMultiple shelves and door baskets
Energy ClassEnergy-efficient operation
Power IndicatorLED power-on light

Installation

Unpack and inspect contents. Place on stable, level surface.

  1. Remove packaging: Take off all tapes, foams, and protective materials.
  2. Position freezer: Allow at least 2 inches (5 cm) clearance on all sides for ventilation.
  3. Adjust feet: Use a wrench to adjust leveling feet until freezer is stable.
  4. Set door direction: If needed, reverse door using instructions in manual.
  5. Let it stand: After moving, let freezer stand upright for 4 hours before plugging in.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation.

First-Time Setup

After installation, prepare freezer for first use.

  1. Clean interior: Wipe inside with solution of warm water and baking soda, then dry.
  2. Plug in: Connect to grounded 120V AC outlet.
  3. Set temperature: Turn thermostat dial to middle setting (recommended -18°C / 0°F).
  4. Pre-cool: Allow freezer to run empty for 3-4 hours before adding food.
  5. Activate fast freeze: For initial cooling or adding large amounts, turn dial to MAX for 24 hours.

CAUTION! Do not use sharp objects to remove ice. Use two people for moving.

Specifications

Controls and Settings

Thermostat dial controls temperature. Located inside freezer compartment.

Thermostat Settings: 1 (warmest) to 7 (coldest). Recommended setting: 3-4 for -18°C (0°F).

Fast Freeze: Turn dial to MAX position for rapid freezing. Use when adding large quantities of unfrozen food. Return to normal setting after 24 hours.

Power Indicator: Green LED lights when freezer is powered on.

Temperature Alarm: (If equipped) sounds when temperature rises above safe level.

Connecting to Power

Use dedicated grounded outlet. Do not use extension cords.

  1. Ensure freezer is unplugged during installation.
  2. Plug into 120V, 60Hz grounded outlet.
  3. Ensure plug is fully inserted.
  4. Check that power indicator LED illuminates.

Tip: Use voltage stabilizer if power fluctuations are common in your area.

Using the Freezer

Proper use ensures efficiency and food safety.

  1. Loading food: Place items in airtight containers or freezer bags to prevent frost.
  2. Organization: Use shelves for packaged items, baskets for smaller items.
  3. Fast freeze: Activate when adding large amounts of unfrozen food.
  4. Door open alarm: (If equipped) sounds if door is left open for more than 2 minutes.
  5. Maximum capacity: Do not exceed maximum load capacity indicated in manual.
  6. Freezing fresh food: Cool cooked food before freezing. Label items with date.

WARNING! Do not store flammable substances or carbonated drinks in glass bottles.

Defrosting Instructions

Manual defrost required when ice buildup exceeds 1/4 inch (6 mm).

  1. Turn thermostat to 0 (OFF) and unplug freezer.
  2. Remove all food, place in coolers with ice packs.
  3. Place towels around base to catch water.
  4. Leave door open to speed melting.
  5. Use plastic scraper to remove ice (never use sharp tools).
  6. Wipe interior with solution of warm water and baking soda.
  7. Dry thoroughly, plug in, set thermostat to normal setting.
  8. Wait 2-3 hours before returning food.

CAUTION! Never use hairdryer, heater, or sharp objects to remove ice.

Care & Cleaning

Unplug before cleaning. Clean every 3-6 months or when needed.

  1. Exterior: Wipe with soft damp cloth and mild detergent. Dry thoroughly.
  2. Interior: Use baking soda solution (1 tbsp per quart of water).
  3. Door seals: Clean with warm water only to maintain elasticity.
  4. Condenser coils: Vacuum dust from rear coils every 6 months.
  5. Drain hole: (If equipped) keep clear of debris.

CAUTION! Do not use abrasive cleaners, solvents, or hot water.

Regulatory Information

UL Listed: Complies with UL Standard 250. Energy Star: Meets energy efficiency guidelines. EPA Refrigerant: Uses R600a, an environmentally friendly refrigerant. For support, visit www.bekousa.com or contact 1-877-461-7356. This appliance is intended for household use only.

Troubleshooting

SymptomPossible CauseCorrective Action
Freezer not coolingPower issue/thermostatCheck plug connection; ensure thermostat not at 0; verify circuit breaker.
Excessive frostDoor seal/warm foodCheck door seal; ensure door closes fully; let hot food cool before freezing.
Loud noiseLeveling/objects nearbyAdjust leveling feet; ensure freezer not touching walls; check for loose items.
Interior light not workingBulb/switchReplace bulb; check door switch mechanism.
Water leakageDrain blocked/defrost neededClear drain hole; defrost if ice buildup excessive.
Door hard to openVacuum seal/gasketWait 1-2 minutes after closing; clean and check gasket.

Reset: Unplug for 5 minutes, then reconnect if electronic issues occur.

Service: 1-877-461-7356; www.bekousa.com

Beko freezer FNE1073N Manual © - All Rights Reserved 2025