Beko freezer FRN 1970HCA Manual

The Beko FRN 1970HCA is a freestanding freezer with a net capacity of 197 liters, featuring a 4-star freezing capability, manual defrost system, adjustable thermostat, interior light, door open alarm, reversible door, and energy-efficient operation. Designed for household use, it offers reliable frozen food storage with user-friendly controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using the Freezer 8. Defrosting & Cleaning 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Freezer cabinet, adjustable thermostat control, interior light, door open alarm, reversible door hinges, adjustable feet, and manual defrost system.

FeatureDescription
Freezing Capacity4-star rating for freezing fresh food
Net Capacity197 liters of storage space
Defrost SystemManual defrost required periodically
Thermostat ControlAdjustable temperature dial (1-5)
Interior LightIlluminates interior when door opens
Door Open AlarmAudible alert if door left open
Reversible DoorDoor can be hinged left or right
Adjustable FeetLeveling feet for stability
Energy EfficiencyDesigned for low power consumption
Storage BasketsIncluded wire baskets for organization

Installation

Unpack and inspect contents. Position in suitable location.

  1. Choose location: Place on flat, stable surface away from heat sources and direct sunlight.
  2. Adjust feet: Use wrench to turn adjustable feet until freezer is level.
  3. Set door direction: Reverse door hinges if needed (tools included).
  4. Clearance: Allow at least 5 cm clearance on all sides for ventilation.
  5. Power connection: Plug into grounded 220-240V AC outlet.

WARNING! Freezer is heavy; lift with care using two people. Ensure proper ventilation space.

First-Time Setup

After installation, prepare freezer for first use.

  1. Clean interior: Wipe inside with mild detergent and water, then dry thoroughly.
  2. Power on: Plug in and turn thermostat dial to position 3.
  3. Initial cooling: Allow freezer to run empty for 2-3 hours until temperature stabilizes.
  4. Load food: Gradually add frozen items, avoiding overpacking.
  5. Set temperature: Adjust thermostat based on ambient conditions and load.

CAUTION! Do not place hot food inside. Allow cooked food to cool first.

Specifications

Controls and Settings

Thermostat dial located inside freezer compartment.

Thermostat Settings: Dial positions 1 (warmest) to 5 (coldest). Recommended setting: 3 for normal use. Adjust to 4-5 in hot weather or when fully loaded.

Door Open Alarm: Sounds if door remains open for approximately 2 minutes. Closes door to stop alarm.

Interior Light: Turns on automatically when door opens. Bulb replacement: Unplug freezer, remove cover, replace with same type bulb.

Adjustable Feet: Turn clockwise to raise, counterclockwise to lower for leveling.

Connecting to Power

Use dedicated grounded outlet. Do not use extension cords.

  1. Ensure freezer is unplugged during installation.
  2. Plug power cord directly into 220-240V AC, 50Hz grounded outlet.
  3. Ensure cord is not pinched or damaged.
  4. Check that outlet voltage matches freezer requirements.

Tip: Use voltage stabilizer if power fluctuations are common in your area.

Using the Freezer

Proper use ensures optimal performance and food preservation.

  1. Loading: Distribute items evenly, leaving space between for air circulation.
  2. Temperature monitoring: Use freezer thermometer to verify -18°C or lower.
  3. Organization: Use baskets for smaller items; place frequently used items on top.
  4. Freezing fresh food: Place fresh food against rear wall for fastest freezing.
  5. Door management: Open door only when necessary and close promptly.
  6. Power outage: Keep door closed; food will remain frozen for up to 24 hours if full.

WARNING! Do not store flammable substances or carbonated drinks in glass bottles.

Defrosting & Cleaning

Manual defrost required when frost layer exceeds 5 mm thickness.

  1. Unplug freezer and remove all food (store in cool place).
  2. Place towels around base to catch water.
  3. Leave door open to accelerate melting (do not use sharp objects to remove ice).
  4. Wipe interior with warm water and mild detergent, then dry thoroughly.
  5. Plug in, set thermostat to 3, wait 2 hours before reloading food.

CAUTION! Never use sharp tools to remove ice; risk of damaging cooling system.

Care & Maintenance

Regular maintenance ensures longevity and efficiency.

CAUTION! Unplug before any maintenance. Do not use steam cleaners.

Regulatory Information

Complies with relevant EU directives and safety standards. This appliance contains refrigerants in sealed system; disposal must follow environmental regulations. Energy label indicates efficiency class. For support, visit www.beko.com or contact local Beko service center. Manufacturer: Beko PLC, UK. Serial number located on rating plate inside compartment.

Troubleshooting

SymptomPossible CauseCorrective Action
Freezer not coolingPower issue/thermostatCheck plug connection; ensure thermostat not at 0; verify power outlet works.
Excessive frost buildupDoor seal/frequent openingCheck door seal cleanliness; avoid frequent/long openings; defrost if needed.
Unusual noiseLeveling/items touchingEnsure freezer is level; check items not touching interior walls.
Door alarm soundsDoor not closed properlyCheck for obstructions; ensure door closes fully; clean door seal.
Interior light not workingBulb failure/door switchReplace bulb; check door switch operation.
Water pooling under freezerDefrost water/drain issueEnsure defrost water evaporator is not blocked; check drain hole.

Reset: Unplug for 5 minutes, then reconnect if electronic issues occur.

Service: Contact authorized Beko service center; do not attempt repairs yourself.

Beko freezer FRN 1970HCA Manual © - All Rights Reserved 2025