Beko freezer FS 166020 Manual

The Beko freezer FS 166020 is a freestanding freezer designed for household use, offering efficient freezing performance with energy-saving features. It includes adjustable thermostat control, fast freeze function, interior light, door open alarm, and adjustable feet for leveling. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Your Freezer 7. Maintenance & Cleaning 8. Energy Saving Tips 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Freezer compartment, adjustable thermostat, fast freeze switch, interior light, door open alarm, adjustable feet, and energy-efficient compressor.

Feature	Description
Adjustable Thermostat	Controls temperature settings for optimal freezing
Fast Freeze Function	Rapidly freezes fresh food to preserve quality
Interior Light	Illuminates interior when door is opened
Door Open Alarm	Audible alert if door remains open too long
Adjustable Feet	For leveling on uneven floors
Energy Efficiency Class	A++ rating for reduced power consumption
Reversible Door	Door can be hinged on left or right side
Storage Baskets	Removable baskets for organized storage
Ice Tray	Included for making ice cubes
Power Indicator	LED shows when unit is powered on

Installation

Unpack and inspect contents. Place on stable, level surface.

Positioning: Allow at least 10cm clearance at back and sides for ventilation.
Leveling: Adjust feet using a wrench to ensure unit is level.
Electrical Connection: Plug into grounded 220-240V AC, 50Hz outlet.
Door Reversal (optional): Follow instructions in manual to change hinge side.
Initial Standby: Let unit stand upright for 4 hours before first use.

WARNING! Do not place near heat sources. Ensure proper ventilation to prevent overheating.

First-Time Setup

After installation, prepare freezer for first use.

Clean Interior: Wipe inside with mild detergent and water, then dry thoroughly.
Power On: Plug in and turn on power.
Set Temperature: Adjust thermostat to middle setting (recommended -18°C).
Activate Fast Freeze: Press Fast Freeze button for 24 hours before loading food.
Load Food: Place food items evenly, avoiding overpacking.

CAUTION! Do not load food until freezer reaches set temperature.

Specifications

Model: FS 166020
Capacity: 166 liters (net)
Energy Class: A++
Annual Energy Consumption: 180 kWh
Climate Class: SN-T (10°C to 43°C)
Refrigerant: R600a
Noise Level: 38 dB(A)
Power Supply: 220-240V AC, 50Hz
Dimensions (HxWxD): 85 x 60 x 63 cm
Weight: 42 kg

Controls and Settings

Control panel located inside or on front of freezer.

Thermostat Knob: Rotate to set temperature (1 warmest, 5 coldest).

Fast Freeze Button: Press to activate rapid freezing for 24 hours.

Alarm Reset Button: Press to silence door open alarm.

Temperature Indicators: LED shows current temperature range.

Recommended Settings: Normal use: setting 3 (-18°C). Hot environments: setting 4. Energy saving: setting 2.

Using Your Freezer

Optimal use guidelines for food preservation.

Pre-freezing: Cool hot food before placing in freezer.
Packaging: Use airtight containers or freezer bags to prevent frost.
Organization: Label and date items; use baskets for easy access.
Fast Freeze: Use for large quantities or fresh food.
Defrosting: Manual defrost required when frost exceeds 5mm thickness.

Tip: Keep door closed as much as possible to maintain temperature.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Unplug freezer before cleaning.
Interior Cleaning: Use mild detergent and warm water; avoid abrasives.
Exterior Cleaning: Wipe with damp cloth; dry thoroughly.
Defrosting: Turn off, remove food, let ice melt naturally (place towels to absorb water).
Condenser Coils: Vacuum dust from rear coils every 6 months.
Door Seals: Clean with soapy water; check for proper seal.

CAUTION! Never use sharp objects to remove ice. Do not use chemical cleaners.

Energy Saving Tips

Set thermostat to recommended -18°C.
Ensure door seals are tight and clean.
Allow hot food to cool before freezing.
Defrost regularly to maintain efficiency.
Position away from heat sources and direct sunlight.
Keep freezer at least ¾ full for optimal performance.

Regulatory Information

CE Mark: Complies with European safety standards. WEEE Directive: Do not dispose with household waste; recycle appropriately. RoHS Compliant: Contains no hazardous substances above permitted levels. For support, visit www.beko.com or contact customer service at +44 (0) 333 207 9710.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Freezer not cooling	Power issue/thermostat	Check power connection; ensure thermostat is set correctly.
Excessive frost	Door seal/warm food	Check door seal; ensure food is cooled before freezing.
Unusual noise	Leveling/items touching	Adjust leveling feet; ensure nothing touches interior walls.
Door alarm sounds	Door left open	Close door properly; press alarm reset button.
Interior light not working	Bulb/connection	Replace bulb; check electrical connection.
Water pooling inside	Drain blocked	Clear drain hole at bottom of interior.

Reset: Unplug for 5 minutes, then reconnect if electronic issues occur.

Service: +44 (0) 333 207 9710; www.beko.com