Beko Freezer TSE1424N Manual

The Beko Freezer TSE1424N is a freestanding upright freezer with a net capacity of 142 liters, featuring a 4-star freezer rating, manual defrost system, adjustable thermostat, interior light, door open alarm, reversible door, and adjustable feet. Designed for household use with energy efficiency in mind. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading and Organizing 7. Defrosting 8. Energy Saving Tips 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright cabinet with multiple shelves and drawers, adjustable thermostat control, interior light, door alarm, reversible door hinges, and adjustable feet.

FeatureDescription
Freezer Rating4-star (suitable for freezing fresh food and storing frozen food for extended periods)
Net Capacity142 liters
Defrost SystemManual defrost
ThermostatAdjustable dial (1-5, with 5 being coldest)
Interior LightIlluminates interior when door is opened
Door Open AlarmAudible alarm sounds if door is left open for several minutes
Reversible DoorDoor can be hung on left or right side
Adjustable FeetLeveling feet to stabilize on uneven floors
Shelves & DrawersMultiple adjustable shelves and storage drawers
Energy ClassDesigned for energy efficiency

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

  1. Positioning: Allow at least 5 cm clearance at back and sides for ventilation.
  2. Leveling: Adjust feet using a wrench to ensure freezer is level.
  3. Door Reversal (if needed): Follow instructions in manual to change door hinge side.
  4. Power Connection: Plug into a grounded 220-240V AC, 50Hz outlet.
  5. Initial Standby: Let freezer stand upright for 4-6 hours before first use.

WARNING! Do not place near ovens, radiators, or in direct sunlight. Ensure proper ventilation.

First-Time Setup

After installation, prepare freezer for first use.

  1. Cleaning: Wipe interior with solution of bicarbonate of soda and water, then dry.
  2. Thermostat Setting: Set thermostat to middle position (e.g., 3).
  3. Pre-cooling: Switch on and let run empty for 2-3 hours to reach temperature.
  4. Loading: Gradually add food items, avoiding overloading.

CAUTION! Do not use sharp objects or abrasive cleaners. Handle with care during installation.

Specifications

Controls and Settings

Thermostat Control Dial: Located inside or on front. Turn clockwise (higher number) for colder temperature, counterclockwise for warmer.

Indicator Lights/Alarms: Power-on light; door alarm activates if door ajar.

Temperature Setting Guide: 1-2 for less cold (energy saving), 3-4 for normal freezing, 5 for maximum cooling (quick freeze). Allow 24 hours for temperature stabilization after adjustment.

Loading and Organizing

For optimal performance and food preservation.

  1. Avoid Overloading: Ensure air circulation around items.
  2. Use Drawers and Shelves: Organize by food type (meat, vegetables, ready meals).
  3. Pre-freeze Fresh Food: Spread items out initially to freeze faster.
  4. Label and Date: Use labels to track storage times.
  5. Keep Door Closed: Minimize opening time and frequency.

Tip: Do not place hot food directly into freezer; allow to cool first.

Defrosting

Manual defrost required when frost layer exceeds 5 mm.

  1. Preparation: Remove all food, place in coolers or another freezer.
  2. Switch Off: Turn thermostat to "0" or unplug.
  3. Speed Up Defrost: Place bowls of warm water inside; keep door open.
  4. Remove Water: Use sponge and towels to soak up melted ice.
  5. Cleaning: Clean interior as described in Care section.
  6. Restart: Plug in, set thermostat, let run 2-3 hours before reloading food.

WARNING! Never use sharp tools or heaters to remove ice. Do not pour water directly into freezer.

Energy Saving Tips

Ensure door seals are clean and tight. Position away from heat sources. Allow hot food to cool before freezing. Defrost regularly. Keep freezer reasonably full for better efficiency.

Care & Cleaning

Unplug before cleaning. Use mild detergent and water; rinse and dry thoroughly.

Exterior: Wipe with soft damp cloth. Interior: Clean shelves and drawers separately. Door Seals: Wipe gently to maintain seal.

CAUTION! Do not use abrasive cleaners, solvents, or harsh chemicals. Never wash removable parts in dishwasher unless specified.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. This appliance contains refrigerants and insulation blowing gases; dispose of according to local regulations. For support, visit www.beko.com or contact local Beko service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Freezer not coolingPower issue, thermostat settingCheck plug/power; ensure thermostat not at "0"; allow time after adjustment.
Excessive frostDoor seal leak, frequent openingCheck seal cleanliness/damage; defrost; minimize door openings.
Unusual noiseLeveling, items touching fanEnsure freezer is level; check for items obstructing interior fan.
Door alarm soundsDoor ajarClose door firmly; check for obstructions in seal.
Interior light not workingBulb failureReplace bulb with specified type (unplug first).
Water pooling inside/underDrain hole blocked (if applicable)Clear drain hole with appropriate tool during defrost.

Reset: Turn thermostat to "0", wait 5 minutes, turn back on.

Service: Contact authorized Beko service. Do not attempt repairs yourself.

Beko Freezer TSE1424N Manual © - All Rights Reserved 2025